Product Description:Refractory plastic is made of high alumina clinker, corundum, silicon carbide and other wear-resistant materials as aggregate, combined with powder or liquid binder, mixed with a number of additives
Product Advantage:Refractory plastic is a kind of clay blank or amorphous clay mass refractory constructed by means of ramming, vibration or pressing.Refractory plastics have reburning line changes, thermal shock resistance, slag resistance, acid resistance, alkali resistance, hydration resistance, carbon monoxide resistance, conductivity, oxidation resistance, etc.
Application:Refractory plastics are suitable for the cyclone cylinder of circulating vulcanized bed boiler, the lining of furnace wall and the parts with severe impact and wear of coal ash.
|Cold crushing strength, MPa||110℃*24h||8||10||15||20|
|Refractoriness under load||0.60%||1320||1380||1420||1500|
|Linear rate of change, %||1400℃*3h||±0.5||±0.5||±0.4||±0.3|
|Bulk density g/m3||2.4||2.45||2.55||2.7|
If you need our products please write down any questions, we wi
We are factory. And we can supply good pre-sale and after-sales service.